Question: Can I just screw into concrete?

Can you screw directly into concrete? Concrete screws are a quick and convenient way to fasten to concrete. The best thing about these screws is that you can screw directly into concrete without any need for hammering or an anchor or shield to install. All you have to do is drill a hole and drive in the screw.

Can you screw into concrete without drilling?

It is possible to screw into the concrete while only using a regular drill. However, you will be going to need special tools, and the process may be a bit longer and more complicated. No worries, though. Remember, a regular drill may work but is still not as effective as a hammer drill.

How do you screw into concrete?

1:202:42How To Screw Into Concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter you have the hole drilled you just take a hammer and tap the anchor in.MoreAfter you have the hole drilled you just take a hammer and tap the anchor in.

Should you drill a pilot hole in concrete?

The average depth to drill your concrete screws is typically ¼ inch deeper than the length of your screw. You should not drill your pilot hole any deeper than ¾ inch to avoid shearing off the head of your screw. However, to ensure a secure fixing the screw should be driven in at a minimum of at least one inch deep.

What drill bit do I need for concrete?

masonry bits Drill bits that can drill through concrete are called masonry bits. They are also good for drilling through brick and stone. Drill bits with a tungsten carbide tip are the strongest; when it comes to solid concrete, the sharper the better. Masonry bits cut holes through concrete in two steps.

What are Tapcon screws?

Tapcon anchors are masonry screws designed with Advanced Threadform Technology ™, which cuts threads into all masonry materials including concrete, block and brick.

Is it better to screw into brick or mortar?

We recommend drilling into the mortar instead of the brick for a few reasons. Drilling directly into brick is more difficult than drilling into mortar and runs the risk of damaging the brick. It is also easier to repair mortar if you drill into the wrong location or decide to remove your decorative item.

Do you need special screws for masonry?

To screw into brick there are only two things you need. Anchor screws ( Walldog, Tapcon, concrete screw, or screw anchor) and a masonry drill bit. A masonry drill bit is a regular old drill bit with a special tip on the end.

Can you put a screw into brick?

It may take some effort and a few specialized tools, but you can put screws into bricks to hold practically any item you choose. Insert a 5/32-inch carbide drill bit into a power drill for 3/16-inch masonry screws. Drive the masonry screws into the brick at each pilot hole.

What screws to use in masonry?

Masonry screws are manufactured from carbon steel that has a blue coating or from a 410 stainless steel which also has a protective coating. The standard blue coated masonry screw is for use in indoor applications where moisture is not present.

How long should masonry screws be?

Length of Screw The length of masonry screw must be equal to the thickness of the material being fastened plus a minimum of 1” with a maximum embedment of 1-3/4”.

What kind of screws go into brick?

Self-tapping brick anchors, concrete block or concrete screws are used for fastening items to brick. Concrete screws are most commonly called Tapcon® masonry screws. The heavy-duty masonry screw has the versatility for use in brick, mortar joints, CMU, block or solid concrete.

Contact us

Find us at the office

Varese- Ganan street no. 91, 84563 Mata-Utu, Wallis and Futuna

Give us a ring

Curtis Pietrantoni
+13 637 813 334
Mon - Fri, 9:00-23:00

Join us